Metal Carport Parts – Your new metal carport is something we can customize to fit your needs. Whether that is accomplished by the application of different trim options or by having an end enclosure, our carports are very adaptable.
You can even start with a carport and later, add sides, a front and back enclosure and have a completely enclosed utility building or what we call the Sonoran Garage!
When ordering nonstandard features for your carport that require custom welds/parts we want you to know that all welds are performed in our shops by welders that are certified by the American Welding Society.
Carlos Ortiz, who obtained all his welding certifications on scholarships, is the head of that department at Absolute Steel. Carlos takes great pride in his work and values the certifications he has been issued.
Enclose your sturdy metal carport with any of our accessories. Select from side extensions for greater protection, or choose a gable kit when overall coverage is a must. Turn your metal carport for everyday usage into a seasonal storage solution with our kits, which further block out UV rays and moisture.
Made out of 29-gauge steel and attaching to the valance overhang, side extensions increase the shelter’s coverage and are available by length. As winter approaches, choose from kits ranging in length from 24.5 to 60.5 feet. Gable kits include not only sheet metal but also siding, framing, and all parts for setup.
Extended sheet metal for the side of your 24.5’Long metal carport. This is a 3’Wide run for one side. The metal roof extends over the edge a minimum 1′ on every carport: this accessory will provide 4′ of coverage for one side. Includes screws and trim for installation.
This accessory must be purchased with a metal carport kit and can not be sold separately. The sheet metal is available in widths of 3′. When enclosing the side completely just order the correct amount of 3’W extensions to cover the sidewall height of your metal carport. In some cases you may need to trim the sheet metal to match your metal carport sidewall height.
Corner braces are U-shaped channels that are used to assist in reinforcing the structure of the building. On all of our building, four 2’ long corner braces come standard, and are installed on each corner of the building. Additional corner braces are available at additional cost.
We recommend the use of 2’ long corner braces on each building leg (2 per bow). For buildings with legs that are longer than 8’ , we recommend that customers upgrade to 4’ corner braces on each corner, and we also recommend that they be installed on each building leg (2 per bow).
Extra Panels are additional panels added to provide additional coverage to sides of a building.
A steel panel, usually installed horizontally, with the same curve as the bow of the building. They can be installed on either end of the building, and they extend from the top of the legs up. Gable ends can be installed vertically at an additional cost.
Our garage doors are the roll up type. They retract into a cylinder above the door opening. We offer a variety of sizes 6′ x 6′, 8′ x 7′, 9′ x 7′, 10′ x 8′, 10’ x 10’, and commercial sizes with a chain at 10’x12 and 12′ x 12′. Please note there are no windows in our garage doors.
If your are planning to add and enclosed carport, garage, or other metal building to your property, consider the benifits of adding insulation. If you plan to use your structure as a workshop, art studio, office, play house, or recreation room you will want to make sure its comfortable and energy efficient.
Insulation of your enclosed building offers many benifits:
1. Reduced heat flow and costs for heating or cooling, saving you money.
2. Less heating and cooling means less green house gases.
3. Condensation control; which helps to avoid mold buildup and corrosion of metals.
4. Noise control.
Mobile Home Anchors
Mobile home anchors are used to secure the building in a ground installation only, and they are used primarily on certified buildings. They are helical in design. They can be installed as an option on all other buildings at an additional charge.
Snow braces are U-shaped channels that are used to assist in reinforcing the structure of the building. On all of our building, two 2’ long snow braces come standard, and are installed on each end, on the underside of the crown of the building. Additional snow braces are available at additional cost.
Our optional walk in doors are 34” x 72” and they have a 9” x 9” window.
Our 30″ x 30″ strong, heavy duty and enduring windows give your building a more appealing and finish look.
Should you decide to make your metal carport into a utility or Sonoran Garage, you’ll probably want a pedestrian door in addition to the rollup or sectional for your own personal access. Available in kit form is a pre-cut Pedestrian Door frameout with accompanying trim. This package fits a 3’ x 6’8” personnel door that you’ll purchase at any hardware or building supply store.
Best Metal Carport Parts
Incoming search terms:
- Metal Carport Parts
- carport parts
- metal carport replacement parts
- replacement parts for metal carport
- metal carport frame replacement parts
- metal carport parts supply
- metal carport accessories
- aluminum carport replacement parts
- carports metal carport parts
- metal carport frame parts